فروشگاه

در حال نمایش 2 نتیجه

نمایش سایدبار

نمایش 9 24

حذف فیلترها

مقایسه

ترانسمیتر فشار لبوم CI4100

GENERAL INFORMATION

Series / Product	Series
Brand	LABOM
Origin	Germany
Series	Labom – CI4100

PRESSURE SENSOR SPECIAL FEATURES

Product Type	Electronic Pressure Switch, Pressure Transmitter
Technology (Measuring Principle)	Piezoresistive Thin film
Varieties	Absolute, Explosion Proof (EX), High Accuracy, Vacuum / Compound

MEASURING RANGES

Reference Pressure	Absolute, Gauge
Pressure Unit	[mbar], [bar], [Pa], [hPa], [kPa], [MPa], [g/cm2], [kg/cm2], [psi], [atm], [torr], [mmH2O], [mH2O], [inH2O], [ftH2O], [mmHg], [inHg]
Pressure Range	■ Gauge: -0.25 … 0.25 to -1 … 400 bar, 0 … 1 to 0 … 40 bar ■ Absolute: 0 … 1 to 0 … 16 bar
Pressure Range [bar] [Min]	-1
Pressure Range [bar] [Max]	400
Pressure Range [psi] [Min]	-14.5
Pressure Range [psi] [Max]	5801.5
Static Pressure [bar] [Max]	N/A
Overpressure [bar] [Max]	N/A
Positive Overpressure [bar]	N/A
Negative Overpressure [bar]	N/A
Burst Pressure [bar] [Min]	N/A

PRESSURE SENSOR PERFORMANCE

Accuracy	≤ ± 0.075 %FS, ≤ ± 0.1 %FS, ≤ ± 0.15 %FS
Accuracy Details	Reference accuracy: Per EN 60770 incl. non-linearity, hysteresis and repeatability refer to the adjusted measuring span:
Non-linearity	N/A
Non-linearity Details	N/A
Long Term Stability	≤ ± 0.1 %FS
Long Term Stability Details	Long-term drift: Refer to nominal range ≤ 0.1 %/year
TC Sensitivity	Refer to the datasheet
TC Zero Point	Refer to the datasheet
Adjustable	YES
Adjustability Details	Up to a turndown of 100:1 the measuring span can be freely selected.
Resolution	0.5 µA
Sensitivity	N/A
Response Time	< 120 ms, < 50 ms
Response Time Details	Response time t90 at current output: ■ For 20 Hz measuring rate: typically 120 ms ■ For 100 Hz measuring rate: typically 50 ms

ELECTRICAL SPECIFICATIONS

Output Signal	4 … 20 mA, 4 … 20 mA HART®
Output Signal Details	■ 4 … 20 mA / 2-wire ■ Digitale communication: HART® protocol, Version 7
Supply Voltage	N/A
Load Resistance	N/A
Power Consumption	N/A
Short-circuit Protection	N/A
Reverse Polarity Protection	YES

ENVIROMENTAL CONDITIONS

Media Temperature [°C] [Min]	-40
Media Temperature [°C] [Max]	+100
Ambient Temperature [°C] [Min]	-40
Ambient Temperature [°C] [Max]	+80
Storage Temperature [°C] [Min]	-40
Storage Temperature [°C] [Max]	+80
Compensated Temperature [°C] [Min]	N/A
Compensated Temperature [°C] [Max]	N/A
Ingress Protection	IP65, IP67, IP69K
Vibration Resistance	Vibration resistance per EN 61298-3: 10 … 60 Hz: ± 0.35 mm, 60 … 1000 Hz: 5 g
Shock Resistance	N/A

GENERAL MECHANICAL SPECIFICATIONS

Mounting	Process connection back, Process connection bottom
Process Connection Male/Female	Male
Process Connection	1/2" NPT, 1/4" NPT, G 1/2", G 1/4"
Process Connection Details	N/A
With Damper (Puls-snubber)	NO
Process Connection Material	Stainless steel 1.4301 (304), Stainless steel 1.4404 (316L), Stainless steel 1.4435 (316L)
Diaphragm / Sensor Material	Stainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4542 (17-4 PH / 630)
Filling Fluid	Dry measuring cell, FDA approved, Synthetic oil
Seal	NBR, Silicone
Hygienic Version	NO
Electrical Connection	Cable clamp, Cable gland, M12x1
Electrical Connection Details	Refer to the datasheet
Display	YES
Display Details	■ High-resolution graphic display with backlight ■ 4-button operation ■ Freely configurable display modes ■ continuously rotatable by ± 170 (detent every 90°)
Weight	Approx. 1.4 Kg

TESTS / APPROVALS

Scope Approvals	ATEX / Europe, HART \| FieldComm Group / USA, IECEx / Worldwide
Ship Approvals	N/A
Explosion Protection	Intrinsic Safety "i"
EX Zone	N/A
Other Approvals	N/A
SIL Qualification	SIL 2

INDUSTRIES / APPLICATIONS

Industry	Chemical, Mechanical engineering & Automation, Petrochemical
Application	Gas pressure measurement, Laboratory and test, Potentially hazardous areas, Pressure monitoring in the hazardous areas

افزودن به علاقه مندی

اطلاعات بیشتر

نمایش سریع